Tag Archives: Bill

20120910-135120.jpg

My new job has the perk of access to the hospital laundry service. It’s nice to be able to go to work in “regular” clothes and then change in to scrubs there. Therefore, my partners suggested I purchase scrubs with my name embroidered on it so I could use the laundry service at work.

In the 25 years that I’ve worked in the healthcare industry, I’ve always worn my own scrubs to work and then wore them home. It’s simple laundry, as laundry goes – but there is the concern of germ transmission. I’m not aware of ever bringing germs home to my family and causing them to be sick, but it’s always in the back of my mind. I’ve had several friends that are over-the-top careful about this (even changing clothes in the garage to avoid bringing the clothes into the house). Some parts of the hospital provide scrubs to avoid any issues (e.g., surgery); however ER doctors are usually on their own.

So, when the scrub laundry service became an added benefit to the job – I thought it’d be nice to finally be able to take advantage of this service. My colleagues recommended I purchase 10 sets of scrubs to be sure I always had some available while others were in the laundry service. I purchased the 10 online they arrived within the week. I was excited…except the pants were 4 inches too long.

I decided I could make the long pant legs work with some creative rolling, except it didn’t work very well. I looked pretty stupid with my pants rolled. Embarrassing!

I made the decision to hem all 10 pair of pants. I knew it would be expensive to take it to a seamstress and I didn’t want to ask Linda to take on this big task. So, I determined that I would learn how to do it myself.

I watched about an hour of YouTube videos and talked with Linda about helpful tips. We discussed it with expert sewers – my mother-in-law and a very good friend in the neighborhood. They both offered to do it, but I had resolved that this would be MY project.

The project went well, except our sewing machine began to have mechanical difficulties after the 4th pair. We borrowed a very nice Bernina machine from our neighborhood friend and it went very smoothly after that.

The picture shown is the last leg of my 10th pair. I’m pleased to have added another skill, thanks to the help of a great wife, good friends, and YouTube.

Back in the saddle

Back on June 12, I had a nasty spill on my bike that resulted in a lot of road rash and a fracture to a bone in my pelvis. Exactly 10 weeks later, I returned to the group ride alongside some great friends.

I have had several rides on the indoor trainer over the past month, but they really weren’t that scary because my chance of crashing was pretty low. I did have one solo bike ride one month ago to test out my pelvis – it was sore and I clearly wasn’t ready for a real ride.

One month later, the day came where I was free and the weather was conducive to a bike ride. I looked forward to it all day, but I must admit I was a bit nervous. What if I crashed again?

We met our friends at the normal meeting spot and it felt like a reunion where I was the guest of honor. It was quite a welcome back. Everyone was pleased to see me and i was even happier to see them. I promised Linda that I would ride easy and cautious; any crash would not be because I was pushing it too hard.

As we pushed off, the butterflies began to flutter in the pit of my stomach, but they quickly disappeared. It felt wonderful to be moving down the road on two skinny tires alongside friends that shared the same love of cycling.

Six miles into the ride, we came upon the site of the crash. The butterflies returned, but they quickly fluttered away as I rode away from the site. We laughed and joked about remembering that not, but it was heavy on my mind recalling how surreal that night was. We all had a chuckle when one of them renamed the hill, “The Pelvis Cracker”.

I was concerned that 10 weeks without exercise would leave me breathless and weak throughout the ride. However, throughout the ride I felt strong. By the end of the ride, I felt great. No pain in the pelvis and the ride was fun. What a great evening.

Update on “Pelvis Presley”

Today I had my follow-up appointment with the orthopedic surgeon. After an x-ray confirmed that the fracture was still there, although improving, it was determined that I’m doing just fine. My recovery is progressing well, maybe better than expected.

I still have some limp, but I just about don’t need the cane anymore. I have very little discomfort in my pelvis when I walk; however the road rash is still a bit troublesome. Today was the first day that the deepest abrasions were no longer oozing. I’ve got thick scabs on most of the wounds and they’re itching.

I’m allowed to sit on my bike on the trainer for small amounts of time next week. However, it’ll be about five more weeks before I can really ride.

Biking is done for a while

Two nights ago, I learned what it’s like to be a patient in my own ER. After a long shift in the ER earlier that day, I met Linda and our group of riding friends for our regular Tuesday night ride. It was a beautiful night and I was just glad to be out on the bike.

Six miles into the ride, I had just finished going down a good hill at 33mph and was passing everyone going up the next hill. I stood up to give a bit more power and the chain came off. In a split-second, I was down on my right side and sliding along then paved road.

My head hurt, my back hurt, and my skinned/bleeding right shoulder/arm was stinging. All of my fellow riders gathered around me and talking about calling an ambulance – I protested heavily. I tried sitting up, but the incredible wave of dizziness prevented me from doing that. I crab-walked out of the street into the grass and lay there for a short time. Eventually, I was able to sit up and struggle to my feet. I wanted to ride on, but my bike was not in condition to be ridden. That answered that (made me upset but everyone else was glad I couldn’t even try to ride).

A very, very kind good Samaritan, Cathy, offered to load my bike into the back of her minivan and drive me back to the parking lot where my car was. This was wonderful, as it turns out she is a mutual friend of other biking friends. However, in my conversation with her, I realized I had a concussion as I was having trouble coming up with things I knew I should know (like the name of the school my girls attend).

Linda and a couple of other friends rode their bikes back to the car and arrived within minutes of me arriving. In the few minutes I was there waiting for them to arrive, I decided I was injured more than just the scrapes and bruises – I needed x-rays. I called my ER and told my partner what had happened and that I would be coming in.

After walking in to the ER, it was quite a relief to finally lay down. However, this caused my head to spin even more and nausea set in. Fortunately, an IV was started and I received medicine for the nausea and the pain. We decided to start with x-rays of my lumbar spine and pelvis and, because of the hit to my head, a CAT scan of my head. The CAT scan was normal, as was the x-ray of my spine; however, the pelvis x-ray revealed a fracture. After discussion with my partner, we agreed to get a CAT scan of my abdomen and pelvis to better understand the extent of the injuries. The result was a comminuted fracture of the inferior pubic ramus on the right side. Here is a diagram of a pelvis with fractures of bilateral superior and inferior pubic rami:

20120614-100908.jpg

Here is a snapshot of my CAT scan with the fracture of my right inferior pubic ramus (seen on your left, as you are viewing the pelvis from below):

20120614-103557.jpg

The wounds were all cleaned, which honestly hurt more than anything else. Eventually, after much protesting from me about possible admission to the hospital, I was sent home with plans to use the crutches I already owned. A quick stop by the pharmacy for some medicine and I was finally home at 11:30. Here is a picture of my arrival home:

20120614-101751.jpg

Here is a picture of my abrasions the next morning:

20120614-101851.jpg

And finally – here’s my shoulder after 24 hours:

20120614-101949.jpg

It will likely be 4-6 weeks before I’m healed, but I hope to be back to work in the day or two. As long as I’m using the crutches, I’m not in much pain. Soon, I can probably have a cane – I can look like Dr. House.

I’ve had many texts, phone calls, and Facebook messages – for which I’m very grateful. Thanks to all of my friends, but most of all thanks to Linda for her wonderful care if mr over the past 36 hours. I love you, Linda!

Bill – the electrician apprentice

It seems the house has figured out that I have learned a thing or two about wiring – the kitchen ceiling fan gave up the ghost. I believe it was likely the motor because the light still worked. Because I recently learned the light kit is wired separately, I investigated to see if there was something wrong with the fan wiring. The wiring was fine – likely the motor was burned up. No matter how many time we flipped switches, pulled chains, assisted the fan blades by manually pushing them, or simply cursing the fan, it never worked.

Another trip to The Home Depot and a new fan was purchased and installed within an hour.

Doesn’t look bad…

20120603-174314.jpg

Let the light be moved

A couple days ago, I wrote about the addition of a light kit to our ceiling fan in our living room, thus adding light to a room that we have avoided for 9 years because it was too dark. There was one other project hanging over our heads.

Five years ago, we remodeled our kitchen. We had a contractor break through the walls into the formal dining room and create one large kitchen. The room was demolished, including all of the drywall, flooring, and ceiling. We designed every inch of the room and made the kitchen that we wanted for all time.

When it was completed, we discovered that the light over the dining table was installed about 10 inches off center. Of course, this happened because the lightbox was installed before the ceiling was installed and there was no furniture in the room. It was a good attempt – but a horrible final product. Linda almost had the contractor move it at the time (which would have meant a lot more labor and a patched ceiling. Ultimately, we decided to leave it alone.

Leaving it alone just wasn’t good enough, however. Linda notes that she sees this off-set light every time she enters the room. To hear her tell about it, you’d think she’s embarrassed about the room because of this one thing. When asked, most people don’t even notice it until it’s pointed out to them.

However, Linda finally came up with a solution: Place a hook and swag it over. I didn’t think I’d like it, but it works quite well.

20120601-141213.jpg

Let there be light

Since moving into our house in March of 2003, we have been living in relative darkness – in our living room, that is. The only installed lights in the room are three can lights over the fireplace at the far end of the room. We’ve added lamps, but they really didn’t do much to light the room, just give enough light from which one could read.

We’ve painted the walls lighter colors, which helped a bit. However, when we added on the sunroom to the back of the house, it covered the one large window of the living room – thus blocking out even more sunlight. The room was getting darker and we didn’t like it.

We discussed having an electrician install more can lights throughout the ceiling – that would surely get more light in the room. However, this was an obviously expensive option. We thought about painting all of the decorative wood paneling in the room white so that could brighten the room up; this was an unpopular option.

Finally, we wished out loud about how nice it would be if the ceiling fan in the middle of the ceiling had a light on it. We knew there were light kits out there, but neither of us are electricians. Linda decided it was worth my potential electrocution to see if we could do it ourselves.

All it took was a trip to The Home Depot, $25 and 10 minutes of my time and IT WORKS.

Here are pictures to show the difference. The first picture is the room fully lit to its full potential prior to the light kit being added.

20120530-122433.jpg

20120530-122452.jpg

20120530-122543.jpg

Happy 19th Anniversary

19 years ago today – May 22, 1993 – Linda and I got married at St Isidore’s Catholic Church in Manhattan, KS. We were surrounded with great friends and all of our family.

Looking at the picture of our wedding party provides a lot of smiles – we have regular contact with all but two of the guys. The two flower girls (my cousins) are grown and are starting families of their own. The others are all good friends and we think of them often.

Boy, were we all young back then…

Friends in the Doctor’s Lounge

Monday night was great because I got to spend it with some very good friends in The Doctor’s Lounge (the screened-in patio in my back yard). A friend that spends most of his time out of town was able to come over to enjoy cigars and share some rare beers. We get to see each other about 4 or 5 times a year when he’s back in town.

The evening improved when we were able to convince another friend to join us for a cigar later in the evening. Finally, the evening was completed when a work friend joined us late at night after he got off work. There we were – me being the only connection to all of us – four men enjoying cigars and conversation.

It will probably be months before the four of us would ever have a night that we could all meet again. However, this past night was special enough to last for several more months. What a wonderful way to finish off a beautiful night in the Doctor’s Lounge.